Trailer Slipper End Leaf Springs
Trailer slipper end springs are a form of leaf spring in which one end is fixed and the other slides through an open bracket as the spring flexes under load. They have similar advantages to double eye springs and are available with a range of capacities for single and twin axle trailer use.
They are all 2 inches wide and are fitted with a metalastic type bush at the eye end. Each set of springs are supplied with a kit of shackle equipment to fix the spring to the chassis and axle. The brackets which fit to the chassis can be high or low mount depending on the height of the trailer bed required. Please specify when ordering.
As with double eye springs, where a twin axle application is used, they can either be fitted in single sets (tandem) or linked (close coupled).
pair of Slipper End leaf springs rated at 1500kg/per pr, 4 leaf, 2" x 5/16 x 24". For use with solid beam axles these springs are supplied c/w shackles to mount to the chassis and u-bolts, plates etc. to attach to the axles. If ordering separately please advise axle size so correct u-bolts can be supplied.
VAT
pair of Slipper End leaf springs rated at 1550kg/per pr, 4 leaf, 2" x 11/32 x 30". For use with solid beam axles these springs are supplied c/w shackles to mount to the chassis and u-bolts, plates etc. to attach to the axles. If ordering separately please advise axle size so correct u-bolts can be supplied.
VAT
pair of Slipper End leaf springs rated at 2250kg/per pr, 6 leaf, 2" x 5/16 x 24". For use with solid beam axles these springs are supplied c/w shackles to mount to the chassis and u-bolts, plates etc. to attach to the axles. If ordering separately please advise axle size so correct u-bolts can be supplied.
VAT
pair of Slipper End leaf springs rated at 1950kg/per pr, 5 leaf, 2" x 11/32 x 30". For use with solid beam axles these springs are supplied c/w shackles to mount to the chassis and u-bolts, plates etc. to attach to the axles. If ordering separately please advise axle size so correct u-bolts can be supplied.
VAT
set of 4 Slipper End leaf springs, close-coupled c/w centre balance beams rated at 3000kg/per set, 4 leaf, 2" x 5/16 x 24". For use with solid beam axles these springs are supplied c/w shackles to mount to the chassis and u-bolts, plates etc. to attach to the axles. NB. when using close-coupled arrangement the width between the axles is governed by the spring length - reasonable clearance is required between the wheels so please check maximum wheel/tyre size for the length of spring. If ordering separately please advise axle size so correct u-bolts can be supplied.
VAT
set of 4 Slipper End leaf springs, close-coupled c/w centre balance beams rated at 4500kg/per set, 6 leaf, 2" x 5/16 x 24". For use with solid beam axles these springs are supplied c/w shackles to mount to the chassis and u-bolts, plates etc. to attach to the axles. NB. when using close-coupled arrangement the width between the axles is governed by the spring length - reasonable clearance is required between the wheels so please check maximum wheel/tyre size for the length of spring. If ordering separately please advise axle size so correct u-bolts can be supplied.
VAT
set of 4 Slipper End leaf springs, close-coupled c/w centre balance beams rated at 3100kg/per set, 4 leaf, 2" x 11/32 x 30". For use with solid beam axles these springs are supplied c/w shackles to mount to the chassis and u-bolts, plates etc. to attach to the axles. NB. when using close-coupled arrangement the width between the axles is governed by the spring length - reasonable clearance is required between the wheels so please check maximum wheel/tyre size for the length of spring. If ordering separately please advise axle size so correct u-bolts can be supplied.
VAT
set of 4 Slipper End leaf springs, close-coupled c/w centre balance beams rated at 3900kg/per set, 5 leaf, 2" x 11/32 x 30". For use with solid beam axles these springs are supplied c/w shackles to mount to the chassis and u-bolts, plates etc. to attach to the axles. NB. when using close-coupled arrangement the width between the axles is governed by the spring length - reasonable clearance is required between the wheels so please check maximum wheel/tyre size for the length of spring. If ordering separately please advise axle size so correct u-bolts can be supplied.
VAT