Trailer Suspension Unit & Axle Spares
Autow Warehouse for braked and unbraked trailer suspension spares, bowden cables, brake shoes, hubs, stubs & spares.
12mm wheel stud to suit Peak hubs & brake drums, black.
VAT
16mm wheel stud to suit Peak hubs & brake drums, black.
VAT
10mm wheel stud to suit new HG510 hubs, black.
VAT
Taper roller bearing kit with seal and cup rings, to fit 160x35, AHU440 & AHU410 hubs.
VAT
Bearing Kit: 203 x 40 Drum & 200 x 50 Drum
VAT
Bearing Kit: 250 x 40 Drum
VAT
Plastic grease cap to fit; HG505, HG510, HG515 & HG545 hubs.
VAT
Plated steel grease cap to fit Peak hubs & drums; 51mm dia.
VAT
Grease Cap: Peak - 70mm
VAT
Knott Detatchable Trailer Brake Cable with clevis end: 1240mm black outer length/1480mm inner length. As used by Peak Trailers.
VAT
Knott Detatchable Trailer Brake Cable with clevis end: 1600mm black outer length/1840mm inner length. As used by Peak Trailers.
VAT
Single compensating bar for Bowden cable brakes
VAT
Double compensating bar for Bowden cable brakes
VAT
M10 Threaded brake rod for Knott couplings. Two 5ft lengths with long nut and plain nuts.
VAT
Shackle shoe for use with double eye leaf springs - weld on or bolt on
VAT
Brass bush used in the eye of the double-eye leaf springs. Length = 2" (50.8mm) Outer diametre = ¾" (19.05mm) Internal diametre = 5/8" (15.875 mm)
VAT
Plain shackle bolt c/w grease nipple and nut - 3¼" long. Used through the outer holes of the centre balance beam to fix the eye of the leaf spring on tandem set up.
VAT
Plain shackle bolt c/w grease nipple and nut - 4" long. Used in the middle of the centre balance beam on tandem spring set up.
VAT